[Contribution to a book, Contribution to a conference proceedings]
Objectifying Machine Setup and Parameter Selection in Expert Knowledge Dependent Industries Using Invertible Neural Networks
In: Flexible automation and intelligent manufacturing: the human-data-technology nexus : proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA / Kyoung-Yun Kim, Leslie Monplaisir, Jeremy Rickli editors. - Volume 1, 293-300, 2022
[DOI: 10.1007/978-3-031-18326-3_29]

Müller, Kai Bruno (Corresponding author)
Posada Moreno, Andres Felipe
Pelzer, Lukas
Gries, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Smart Fiber-Based Sensor Systems for Hydraulic Engineering
In: European Workshop on Structural Health Monitoring : EWSHM 2022 / Piervincenzo Rizzo, Alberto Milazzo editors. - Volume 1, 856-864, 2022
[DOI: 10.1007/978-3-031-07254-3_86]

Dittel, Gözdem (Corresponding author)
Scheurer, Martin Wilhelm
Gries, Thomas

[Journal Article]
A high-sensitivity biosensor based on a metal-insulator-metal diamond resonator and application for biochemical and environment detections
In: Optik : international journal for light and electron optics = Optics, 271, 170083, 2022
[DOI: 10.1016/j.ijleo.2022.170083]

Bahri, Hocine (Corresponding author)
Hocini, Abdesselam
Bensalah, Hocine
Mouetsi, Souheil
Ingebrandt, Sven
et al.

[Journal Article]
Cellulose aerogel nonwovens : sustainable insulators of tomorrow
In: Chemical fibers international, 72 (4), 211-213, 2022

Mohr, Maximilian Peter
Schriever, Sascha Georg
Gries, Thomas

[Contribution to a book]
Second life for carbon fibres : electrical functionalised composites
In: Composites Sustainability Report 2022 / Deputy Editor and Project Coordinator: Antoine Morel, 201-205, 2022

Möbitz, Christian Hartmut
Cloppenburg, Frederik
Gries, Thomas

[Journal Article]
An experimental investigation of the mechanical performance of PLLA wire-braided stents
In: Journal of the mechanical behavior of biomedical materials, 105568, 2022
[DOI: 10.1016/j.jmbbm.2022.105568]

Lucchetti, Agnese
Emonts, Caroline
Idrissi, Akram
Gries, Thomas
Vaughan, Ted J. (Corresponding author)

[Journal Article]
Enzyme Hydration: How to Retain Resistance in Ionic Liquids
In: ACS sustainable chemistry & engineering, 10 (46), 15104-15114, 2022
[DOI: 10.1021/acssuschemeng.2c04216]

Cui, Haiyang
Zhang, Lingling
Yildiz, Can Bora
Eltoukhy, Lobna
Cheng, Leiyu
et al.

[Journal Article]
Radiotherapy-triggered prodrug activation: A new era in precise chemotherapy
In: Med, 3 (9), 600-602, 2022
[DOI: 10.1016/j.medj.2022.08.004]

Li, Xin (Corresponding author)
Sun, Haitao
Lu, Yi (Corresponding author)
Xing, Lingxi (Corresponding author)

[Journal Article]
Flexibility Regulation of Loops Surrounding the Tunnel Entrance in Cytochrome P450 Enhanced Substrate Access Substantially
In: ACS catalysis, 12 (20), 12800-12808, 2022
[DOI: 10.1021/acscatal.2c02258]

Li, Zhongyu
Meng, Shuaiqi
Nie, Kaili
Schwaneberg, Ulrich
Davari, Mehdi D.
et al.

[Journal Article]
Anisotropic microgels by supramolecular assembly and precipitation polymerization of pyrazole-modified monomers
In: Advanced science, 2204853, 2022
[DOI: 10.1002/advs.202204853]

Grabowski, Frédéric
Petrovskii, Vladislav S.
Fink, Fabian
Demco, Dan Eugen
Herres-Pawlis, Sonja
et al.

[Contribution to a conference proceedings, Journal Article]
Criteria for Implant Fit Assessment in Total Knee Arthroplasty - A Review
In: Current directions in biomedical engineering, 8 (2), 165-168, 2022
[DOI: 10.1515/cdbme-2022-1043]

Grothues, Sonja A. G. A. (Corresponding author)
Radermacher, Klaus

[Journal Article]
Potential for femoral size optimization for off‐the‐shelf implants: A CT derived implant database analysis
In: Journal of orthopaedic research, 2022
[DOI: 10.1002/jor.25464]

Grothues, Sonja A. G. A. (Corresponding author)
Hohlmann, Benjamin
Zingde, Sumesh M.
Radermacher, Klaus

[Journal Article]
Safe design of surgical robots - a systematic approach to comprehensive hazard identification
In: Biomedical engineering = Biomedizinische Technik, 2022
[DOI: 10.1515/bmt-2022-0202]

Theisgen, Lukas (Corresponding author)
Strauch, Florian
de la Fuente Klein, Matias
Radermacher, Klaus

[Journal Article]
Influence of the pulse repetition rate on the acoustic output of ballistic pressure wave devices
In: Scientific reports, 12 (1), 18060, 2022
[DOI: 10.1038/s41598-022-21595-5]

Reinhardt, Nina Mareen (Corresponding author)
Wegenaer, Jens
de la Fuente Klein, Matias

[Journal Article]
A general approach for all-visible-light switching of diarylethenes through triplet sensitization using semiconducting nanocrystals
In: Journal of materials chemistry / C, 10 (42), 15833-15842, 2022
[DOI: 10.1039/D2TC03582K]

Hou, Lili (Corresponding author)
Larsson, Wera
Hecht, Stefan
Andréasson, Joakim
Albinsson, Bo (Corresponding author)

[Journal Article]
Responsive Polyphenol-Crosslinked Supramacromolecular Microgels with pH-Triggered Disassembly in Aqueous Solution
In: Macromolecular chemistry and physics, 2200213, 2022
[DOI: 10.1002/macp.202200213]

Molano-López, Catalina
Braun, Susanne
Kather, Michael
Töpel, Tobias Alexander
van Wissen, Gil
et al.

[Journal Article]
Into the fourth dimension with 3d printing
In: Kunststoffe / Kunststoffe international, 112 (8), 110-112, 2022

Kelbel, Hannah Carlotta
Ahrens-Wels, Helga
Winands, Katarina

[Journal Article]
New test standards for spacer fabrics
In: Melliand international, 28 (4), 205-206, 2022

Bettermann, Isa
Schwager, Carolin
Peiner, Christoph
Gries, Thomas

[Contribution to a conference proceedings, Journal Article]
Structure protects function - An enabler for the functionalization of component surfaces by biohybrid coatings
In: Procedia CIRP, 110, 133-138, 2022

Bergs, Thomas
Schwaneberg, Ulrich
Apelt, Sebastian
Jakob, Felix
Rodriguez-Emmenegger, Cesar
et al.

[Contribution to a book, Journal Article]
Effervescent Atomizer as Novel Cell Spray Technology to Decrease the Gas-to-Liquid Ratio
In: Pharmaceutics, 14 (11), 2421, 2022
[DOI: 10.3390/pharmaceutics14112421]

Thiebes, Anja Lena (Corresponding author)
Klein, Sarah
Zingsheim, Jonas
Möller, Georg Henning
Gürzing, Stefanie Denise
et al.

[Journal Article]
Large-Scale Tungsten Fibre-Reinforced Tungsten and Its Mechanical Properties
In: Journal of nuclear engineering, 3 (4), 306-320, 2022
[DOI: 10.3390/jne3040018]

Schwalenberg, Daniel
Coenen, Jan Willem
Riesch, Johann
Hoeschen, Till
Mao, Yiran
et al.

[Contribution to a book, Journal Article]
3D-Braided Poly-ε-Caprolactone-Based Scaffolds for Ligament Tissue Engineering
In: Journal of Functional Biomaterials, 13 (4), Art. 230, 2022
[DOI: 10.3390/jfb13040230]

Emonts, Caroline (Corresponding author)
Wienen, David Heinrich
Bauer, Benedict
Idrissi, Akram
Gries, Thomas (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Retrofitting Industrial Machines with WebAssembly on the Edge
In: Web Information Systems Engineering - WISE 2022 : 23rd International Conference, Biarritz, France, November 1-3, 2022, Proceedings / edited by Richard Chbeir, Helen Huang, Fabrizio Silvestri, Yannis Manolopoulos, Yanchun Zhang, 241-256, 2022
[DOI: 10.1007/978-3-031-20891-1_18]

Nakakaze, Otoya (Corresponding author)
Koren, István
Brillowski, Florian Sascha
Klamma, Ralf

[Journal Article]
Physical interpretation of mixed ionic-electronic conductive polymer-coated electrodes by a simple universal impedance model
In: Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis, 1-9, 2022
[DOI: 10.1002/elan.202200332]

Tintelott, Marcel
Kremers, Tom
Mernitz, Anabel
Ingebrandt, Sven
Pachauri, Vivek
et al.

[Journal Article]
Hydrogen in textile technology
In: textile.4U, 2022 (3), 46-47, 2022

Mölling, Tim (Corresponding author)
Jois, Kumar Chandrashek
Grigat, Niels
Bareiro Fereira, Oscar
Granich, Dominik
et al.

[Journal Article]
Data-driven quality management : quality ist good, modeling is better
In: Melliand international, 28 (5), 250-250, 2022

Kins, Ruben
Cloppenburg, Frederik
Gries, Thomas

[Journal Article]
Machine Learning und dezentrale Produktionsnetzwerke zur nachhaltigen Textilproduktion
In: Melliand-Textilberichte, 103 (5), 192-193, 2022

Müller, Kai Bruno

[Journal Article]
Measurement of Electrokinetically induced hydrodynamics at Ion-selective interfaces using 3D Micro particle tracking velocimetry (µPTV)
In: MethodsX, 9, 101814, 2022
[DOI: 10.1016/j.mex.2022.101814]

Stockmeier, Felix
Schatz, Michael
Habermann, Malte
Linkhorst, John
Mani, Ali
et al.

[Talk (non-conference)]
Geschlechterspezifische Anforderungen an Persönliche Schutzbekleidung
In: Seminar der Hanseatischen Feuerwehr-Unfallkasse Nord für Bereichs-, Kreis- und Stadt-Sicherheitsbeauftragte sowie Bereichs-, Kreis- und Stadtwehrführer aus Hamburg, Mecklenburg-Vorpommern und Schleswig-Holstein Gägelow 2022-10-21 - 2022-10-22, 2022
[DOI: 10.18154/RWTH-2022-10014]

Schiffer, Carsten (Corresponding author)

[Journal Article]
Biohybrid elastin-like venous valve with potential for in situ tissue engineering
In: Frontiers in Bioengineering and Biotechnology, 10, 988533, 2022
[DOI: 10.3389/fbioe.2022.988533]

González-Pérez, Fernando
Acosta, Sergio
Rütten, Stephan
Emonts, Caroline
Kopp, Wassja Alexander
et al.

[Journal Article]
Dreidimensionale Sandwichbauteile
In: Konstruktion, 74 (11/12), IW6-IW8, 2022

Quadflieg, Till Arne
Manin, Boris

[Contribution to a book, Contribution to a conference proceedings]
Textile Reinforced Concrete for free-form concrete elements: Influence of the binding type of textile reinforcements on the drapability for manufacturing double-curved concrete elements
In: International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2022), Cape Town, South Africa, October 3-5, 2022 / M.G. Alexander, H. Beushausen, F. Dehn, J. Ndawula and P. Moyo (Eds.), 05019, 2022
[DOI: 10.1051/matecconf/202236405019]

Bhat, Shantanu (Corresponding author)
Kalthoff, Matthias
Shroeder, Patrick
Gries, Thomas
Matschei, Thomas

[Journal Article]
Techtextil 2022 : Nachhaltigkeit im Bereich Chemiefasern
In: Technische Textilien, 65 (4), 195-196, 2022

Wissel, Ricarda
Sachtleben, Melina
Gries, Thomas

[Journal Article]
Gewebe mit transversal auxetischem Verhalten
In: Technische Textilien, 65 (4), 211-213, 2022

Krause, Rahel
Schwager, Carolin
Gries, Thomas
Cramer, Florian

[Journal Article]
Produkt-zu-Produkt-Recycling am Beispiel eines Kletterseils
In: Technische Textilien, 65 (4), 199-202, 2022

Debicki, Lukasz Mikolaj
Gries, Thomas
Strozyk, Malte
Baur, Christine
Hoffmann, Ansgar

[Contribution to a conference proceedings]
Experimental investigations on electro-thermal ageing of EPDM for HVDC cable joints
In: [CIGRE Session, 2022-08-28 - 2022-09-02, Paris, France], 2022

Nett, Isabella Lucia
Bendig, Marvin
Soppe, Bastian
Dittrich, Barbara
Wagner, André
et al.

[Journal Article]
Ableitung von Anforderungen an eine AEMP-Benchmark
In: Zentralsterilisation, 30 (5), 228-234, 2022

Heibeyn, Jan (Corresponding author)
Jansen, Oliver
Wiese, Klaus
Deinet, Frank
Roitsch, Maik
et al.

[Journal Article]
Using machine learning to predict paperboard properties - a case study
In: Nordic pulp & paper research journal, 2022
[DOI: 10.1515/npprj-2022-0065]

Othen, Rosario (Corresponding author)
Cloppenburg, Frederik
Gries, Thomas

[Abstract, Journal Article]
P12-27 THP-1 cells as a suitable screening tool for NLRP3 inflammasome activation applied to micro- and nanoplastics
In: Toxicology letters, 368, S185-S185, 2022
[DOI: 10.1016/j.toxlet.2022.07.506]

Busch, M.
Bredeck, G.
Waag, F.
Rahimi, K.
Ramachandran, H.
et al.

[Journal Article]
From In Vitro to Perioperative Vascular Tissue Engineering: Shortening Production Time by Traceable Textile-Reinforcement
In: Tissue engineering and regenerative medicine, 2022
[DOI: 10.1007/s13770-022-00482-0]

Mohapatra, Saurav Ranjan
Rama, Elena
Melcher, Christoph
Call, Tobias
Al Enezy-Ulbrich, Miriam Aischa
et al.

[Journal Article]
Customised, cost-effective implant solutions : personalised patient textile implants produced in single batch sizes
In: Kettenwirk-Praxis / Englische Ausgabe, 56 (2), 23-24, 2022

Gries, Thomas
Lauwigi, Tobias Michael
Kuo, Kai-Chieh
Büchter, Charlotte
Wolf, Hans-Josef

[Journal Article]
Using textiles and pipettes for new organs : warp knitted spacer fabrics as the base structure for 3-dimensional cell culture
In: Kettenwirk-Praxis / Englische Ausgabe, 56 (2), 18-19, 2022

Büchter, Charlotte

[Journal Article]
Multiple assembly strategies for silica aerogel-fiber combinations - A review
In: Materials and design, 223, 111228, 2022
[DOI: 10.1016/j.matdes.2022.111228]

Mazrouei-Sebdani, Zahra
Naeimirad, Mohammadreza
Peterek, Stefan Alexander
Begum, Hasina
Galmarini, Sandra
et al.

[Journal Article]
Messebericht von der Zellcheming Expo 2022 : das Institut für Textiltechnik der RWTH Aachen University in Wiesbaden
In: Wochenblatt für Papierfabrikation : WfP, 150 (9), 44-45, 2022
[DOI: 10.51202/0043-7131-2022-9-044]

Othen, Rosario
Möbitz, Christian Hartmut
Cloppenburg, Frederik
Gries, Thomas

[Journal Article]
Hands-on kinetic measurements and simulation for chemical process engineering students
In: Education for chemical engineers, 41, 14-21, 2022
[DOI: 10.1016/j.ece.2022.08.001]

Herrmann, Stefan
Felder, Daniel Matthias Julian
Padligur, Maria
Brosch, Sebastian
Geiger, Matthias Christian
et al.

[Conference Presentation]
Next generation textile industry = sustainability + digitalization + individual business models
In: ITMF Annual Conference 2022 : Climate Change and a Sustainable Global Textile Value Chain Davos 2022-09-18 - 2022-09-20, 2022

Gries, Thomas
Seidenberg, Martin
Müller, Kai Bruno

[Journal Article]
Entwicklung einer neuartigen polymerbasierten Straßendeckschicht mit Fokus auf Lärmreduzierung und Dauerhaftigkeit
In: Bauingenieur, 97 (10), 323-330, 2022

Faßbender, Sabine (Corresponding author)
Oeser, Markus (Corresponding author)
Eggersmann, Robert
Reese, Stefanie (Corresponding author)
Koch, Andreas
et al.

[Journal Article]
Recyclingtechnologien für synthetische Textilien
In: Textil plus, 10 (09/10), 12-14, 2022

Voebel, Sandy (Corresponding author)
Becker, Amrei Katharina Sabine
Gries, Thomas

[Journal Article]
Optical data rectification and ML-aided impedance analysis for quality assurance of carbon fibre
In: JEC composites magazine, 2022 (147), 25-28, 2022

Lechthaler, Lukas
May, Svante
Gries, Thomas
Kupke, Richard
Feltin, Dirk
et al.

[Journal Article]
KI-gestützte Impedanzanalyse von Carbonfaser-Rovings - Teil 1
In: Textil plus, 10 (09/10), 16-17, 2022

Lechthaler, Lukas (Corresponding author)
May, Svante
Gries, Thomas
Kupke, Richard
Feltin, Dirk
et al.